Stair Carpet Calculator

Whether you are estimating on the spot or checking a result somebody else gave you, the stair carpet calculator is the quickest way to get from effective tread run, extra length, extra width, landing depth, nosing overhang, nosing shape, nosing thickness, number of steps, price of carpet, riser rise and stair width to carpet length (with nosing), carpet area (with nosing) and carpet cost (with nosing).

What Is the Stair Carpet Calculator?

The stair carpet calculator turns effective tread run, extra length, extra width, landing depth, nosing overhang, nosing shape, nosing thickness, number of steps, price of carpet, riser rise and stair width into carpet length (with nosing), carpet area (with nosing) and carpet cost (with nosing), so you can order the right amount of material the first time.

Material estimates are where projects go over budget. Getting the quantities right before the delivery arrives is worth more than any discount on the order.

How to Measure for the Stair Carpet

Measure everything in the same unit and take the largest dimension you can reasonably use rather than the average. Formwork, ground conditions and cutting waste all push the real figure above the theoretical one.

Where a plan calls for a specific thickness, check it against local building regulations before you order. The calculator reflects the relationship, not the code.

Allowing for Waste and Errors

Order a little more than the calculation suggests. The gap between the theoretical quantity and what actually arrives on site is normally waste, spillage, over-excavation and uneven grading, and all of it comes out of the same budget.

Write the figures down and compare them with what you actually used on site. That is how you build an estimate you can trust for the next job.

A Worked Example

Working through an example, with effective tread run set to 10, extra length set to 5, extra width set to 2, the calculator returns y1 of 30, and y2 of 26.18034, and y3 of 0. Substitute your own figures and the same steps produce the same kind of answer.

Frequently Asked Questions

What do I need to work out carpet length (with nosing)?

Enter effective tread run, extra length, extra width, landing depth, nosing overhang, nosing shape, nosing thickness, number of steps, price of carpet, riser rise and stair width. The calculator then works through the relationship and reports carpet length (with nosing), carpet area (with nosing) and carpet cost (with nosing).

What does the stair carpet actually calculate?

It takes effective tread run, extra length, extra width, landing depth, nosing overhang, nosing shape, nosing thickness, number of steps, price of carpet, riser rise and stair width and converts them into carpet length (with nosing), carpet area (with nosing) and carpet cost (with nosing) using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.

How should I enter effective tread run?

Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.

Is the answer exact?

It is as exact as the formula and the inputs allow. The method itself is the standard one for this problem, so the only sources of error are the figures you enter and the precision you ask for.

Why does a small change in one value move the answer so much?

That happens when an output depends on a ratio, because dividing by a small number magnifies any change in it. Check the units first, then check whether the value you entered is in the range the relationship was designed for.

Scroll to Top