This parallel capacitor calculator takes the figures you already have and applies the relationship behind parallel capacitor calculations for you, giving resulting capacitance (c) from capacitor 1 (c1), capacitor 10 (c10), capacitor 2 (c2), capacitor 3 (c3), capacitor 4 (c4), capacitor 5 (c5), capacitor 6 (c6), capacitor 7 (c7), capacitor 8 (c8) and capacitor 9 (c9).
What Is the Parallel Capacitor Calculator?
This parallel capacitor calculator is for the kind of problem where you know the physical quantities but not the number you need. It turns capacitor 1 (c1), capacitor 10 (c10), capacitor 2 (c2), capacitor 3 (c3), capacitor 4 (c4), capacitor 5 (c5), capacitor 6 (c6), capacitor 7 (c7), capacitor 8 (c8) and capacitor 9 (c9) into resulting capacitance (c).
Physics calculations go wrong in predictable ways, usually through mixing units or dropping a digit. Work through the result one step at a time and check that the figures are the size you would expect at each stage.
How the Parallel Capacitor Physics Works
The relationship is applied step by step, and each step is a standard piece of physics rather than a single opaque formula. That means you can check the intermediate values against what the theory predicts, which is usually faster than checking only the final answer.
Keep every value in the same unit system throughout the calculation. Mixing metres and feet part way through is the single most common reason a correct formula gives a wrong answer.
Units, Assumptions and the Limits of the Model
The calculation assumes ideal conditions: no air resistance, no heat loss, and dimensions that do not change while you work. Those assumptions are reasonable for most classroom and engineering estimates, and unreasonable for anything more precise.
Where a value is a rate, it has to be quoted for the same period as everything else. A per-hour figure cannot be combined with a per-day figure without converting one of them first.
A Worked Example
Working through an example, with capacitor 1 (c1) set to 10, capacitor 10 (c10) set to 5, capacitor 2 (c2) set to 2, the calculator returns resulting capacitance (c) of 249. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out resulting capacitance (c)?
Enter capacitor 1 (c1), capacitor 10 (c10), capacitor 2 (c2), capacitor 3 (c3), capacitor 4 (c4), capacitor 5 (c5), capacitor 6 (c6), capacitor 7 (c7), capacitor 8 (c8) and capacitor 9 (c9). The calculator then works through the relationship and reports resulting capacitance (c).
What does the parallel capacitor actually calculate?
It takes capacitor 1 (c1), capacitor 10 (c10), capacitor 2 (c2), capacitor 3 (c3), capacitor 4 (c4), capacitor 5 (c5), capacitor 6 (c6), capacitor 7 (c7), capacitor 8 (c8) and capacitor 9 (c9) and converts them into resulting capacitance (c) using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter capacitor 1 (c1)?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Can I use this for a quick estimate as well as a precise answer?
Yes. The calculator is built for quick checks, so round your inputs to a sensible number of significant figures and the result will be just as useful. If you need more precision, keep the same method and add digits to the inputs rather than adjusting the method itself.
Does anything you type get stored?
No. The whole calculation runs inside your browser, and nothing you enter is uploaded, logged or sent anywhere.