The metric to imperial conversion calculator works out weight / mass in imperial units, temperature in other scales and temperature in fahrenheit from temperature in celsius, area in metric units, length in metric units, volume in metric units and weight / mass in metric units. Enter what you have and the relationship is applied straight away, so you get the answer without working through the algebra yourself.
What Is the Metric to Imperial Conversion Calculator?
The metric to imperial conversion calculator converts temperature in celsius, area in metric units, length in metric units, volume in metric units and weight / mass in metric units between the units you need, so you do not have to hunt for a factor and work it out longhand.
Conversion factors are where unit mistakes happen, and a mistake here tends to propagate silently into everything calculated from it afterwards.
How the Metric to Imperial Conversion Conversion Works
Each conversion uses the exact factor defined for the unit, so the answer is right to the precision you would normally quote.
Convert at one end rather than at several. Converting to a common unit first and then back again introduces rounding that you then have to carry through the rest of the calculation.
Getting the Units Right
Check that the unit you are converting from is the unit you actually measured in. Similar-looking units, particularly gallons and litres or ounces and grams, are the usual source of a factor-of-ten error.
Write down both the value and its unit. A number without a unit is not a measurement, it is a guess.
A Worked Example
Working through an example, with temperature in celsius set to 10, area in metric units set to 5, length in metric units set to 2, the calculator returns temperature in fahrenheit of 10, and temperature in other scales of 10, and area in imperial units of 5. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out weight / mass in imperial units?
Enter temperature in celsius, area in metric units, length in metric units, volume in metric units and weight / mass in metric units. The calculator then works through the relationship and reports weight / mass in imperial units, temperature in other scales and temperature in fahrenheit.
What does the metric to imperial conversion actually calculate?
It takes temperature in celsius, area in metric units, length in metric units, volume in metric units and weight / mass in metric units and converts them into weight / mass in imperial units, temperature in other scales and temperature in fahrenheit using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter temperature in celsius?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Does anything you type get stored?
No. The whole calculation runs inside your browser, and nothing you enter is uploaded, logged or sent anywhere.
Do I have to fill in every field?
Only the fields a particular result depends on. If you leave one blank, the results that need it simply show a note instead of a number, and everything else still works.