Two figures in, a clear answer out. The imperial calculator uses volume in cubic centimeters, area in acres, length in centimeters, temperature in degrees celsius and weight in atomic mass units (amu) to produce temperature in degrees fahrenheit, temperature in degrees rankine and temperature in degrees delisle, applying the standard relationship for this problem in the order the calculation actually needs it.
What Is the Imperial Calculator?
The imperial calculator converts volume in cubic centimeters, area in acres, length in centimeters, temperature in degrees celsius and weight in atomic mass units (amu) between the units you need, so you do not have to hunt for a factor and work it out longhand.
Conversion factors are where unit mistakes happen, and a mistake here tends to propagate silently into everything calculated from it afterwards.
How the Imperial Conversion Works
Each conversion uses the exact factor defined for the unit, so the answer is right to the precision you would normally quote.
Convert at one end rather than at several. Converting to a common unit first and then back again introduces rounding that you then have to carry through the rest of the calculation.
Getting the Units Right
Check that the unit you are converting from is the unit you actually measured in. Similar-looking units, particularly gallons and litres or ounces and grams, are the usual source of a factor-of-ten error.
Write down both the value and its unit. A number without a unit is not a measurement, it is a guess.
A Worked Example
Working through an example, with volume in cubic centimeters set to 10, area in acres set to 5, length in centimeters set to 2, the calculator returns volume in cubic meters of 10, and volume in milliliters of 10, and volume in liters of 10. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out temperature in degrees fahrenheit?
Enter volume in cubic centimeters, area in acres, length in centimeters, temperature in degrees celsius and weight in atomic mass units (amu). The calculator then works through the relationship and reports temperature in degrees fahrenheit, temperature in degrees rankine and temperature in degrees delisle.
What does the imperial actually calculate?
It takes volume in cubic centimeters, area in acres, length in centimeters, temperature in degrees celsius and weight in atomic mass units (amu) and converts them into temperature in degrees fahrenheit, temperature in degrees rankine and temperature in degrees delisle using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter volume in cubic centimeters?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Is the answer exact?
It is as exact as the formula and the inputs allow. The method itself is the standard one for this problem, so the only sources of error are the figures you enter and the precision you ask for.
Do I have to fill in every field?
Only the fields a particular result depends on. If you leave one blank, the results that need it simply show a note instead of a number, and everything else still works.