Whether you are estimating on the spot or checking a result somebody else gave you, the fence stain calculator is the quickest way to get from fence height, fence length, how many sides do you want to stain?, unit price, unit price and stain coverage to total stain needed, total cost of stain and total area.
What Is the Fence Stain Calculator?
The fence stain calculator turns fence height, fence length, how many sides do you want to stain?, unit price, unit price and stain coverage into total stain needed, total cost of stain and total area, so you can order the right amount of material the first time.
Material estimates are where projects go over budget. Getting the quantities right before the delivery arrives is worth more than any discount on the order.
How to Measure for the Fence Stain
Measure everything in the same unit and take the largest dimension you can reasonably use rather than the average. Formwork, ground conditions and cutting waste all push the real figure above the theoretical one.
Where a plan calls for a specific thickness, check it against local building regulations before you order. The calculator reflects the relationship, not the code.
Allowing for Waste and Errors
Order a little more than the calculation suggests. The gap between the theoretical quantity and what actually arrives on site is normally waste, spillage, over-excavation and uneven grading, and all of it comes out of the same budget.
Write the figures down and compare them with what you actually used on site. That is how you build an estimate you can trust for the next job.
A Worked Example
Working through an example, with fence height set to 10, fence length set to 5, how many sides do you want to stain? set to 1, the calculator returns size of fence of 50, and total area of 50, and total stain needed of 5. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out total stain needed?
Enter fence height, fence length, how many sides do you want to stain?, unit price, unit price and stain coverage. The calculator then works through the relationship and reports total stain needed, total cost of stain and total area.
What does the fence stain actually calculate?
It takes fence height, fence length, how many sides do you want to stain?, unit price, unit price and stain coverage and converts them into total stain needed, total cost of stain and total area using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter fence height?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Does anything you type get stored?
No. The whole calculation runs inside your browser, and nothing you enter is uploaded, logged or sent anywhere.
Why does a small change in one value move the answer so much?
That happens when an output depends on a ratio, because dividing by a small number magnifies any change in it. Check the units first, then check whether the value you entered is in the range the relationship was designed for.