The bernoulli equation calculator works out volumetric flow rate, pressure change and mass flow rate from pipe diameter at position 1, pipe diameter at position 2, fluid density, gravitational acceleration, height, height, pressure, pressure, fluid speed and fluid speed. Enter what you have and the relationship is applied straight away, so you get the answer without working through the algebra yourself.
What Is the Bernoulli Equation Calculator?
This bernoulli equation calculator is for the kind of problem where you know the physical quantities but not the number you need. It turns pipe diameter at position 1, pipe diameter at position 2, fluid density, gravitational acceleration, height, height, pressure, pressure, fluid speed and fluid speed into volumetric flow rate, pressure change and mass flow rate.
Physics calculations go wrong in predictable ways, usually through mixing units or dropping a digit. Work through the result one step at a time and check that the figures are the size you would expect at each stage.
How the Bernoulli Equation Physics Works
The relationship is applied step by step, and each step is a standard piece of physics rather than a single opaque formula. That means you can check the intermediate values against what the theory predicts, which is usually faster than checking only the final answer.
Keep every value in the same unit system throughout the calculation. Mixing metres and feet part way through is the single most common reason a correct formula gives a wrong answer.
Units, Assumptions and the Limits of the Model
The calculation assumes ideal conditions: no air resistance, no heat loss, and dimensions that do not change while you work. Those assumptions are reasonable for most classroom and engineering estimates, and unreasonable for anything more precise.
Where a value is a rate, it has to be quoted for the same period as everything else. A per-hour figure cannot be combined with a per-day figure without converting one of them first.
A Worked Example
Working through an example, with pipe diameter at position 1 set to 10, pipe diameter at position 2 set to 5, fluid density set to 2, the calculator returns pressure change of 98, and volumetric flow rate of 785.39816, and mass flow rate of 1,570.79633. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out volumetric flow rate?
Enter pipe diameter at position 1, pipe diameter at position 2, fluid density, gravitational acceleration, height, height, pressure, pressure, fluid speed and fluid speed. The calculator then works through the relationship and reports volumetric flow rate, pressure change and mass flow rate.
What does the bernoulli equation actually calculate?
It takes pipe diameter at position 1, pipe diameter at position 2, fluid density, gravitational acceleration, height, height, pressure, pressure, fluid speed and fluid speed and converts them into volumetric flow rate, pressure change and mass flow rate using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter pipe diameter at position 1?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Can I use this for a quick estimate as well as a precise answer?
Yes. The calculator is built for quick checks, so round your inputs to a sensible number of significant figures and the result will be just as useful. If you need more precision, keep the same method and add digits to the inputs rather than adjusting the method itself.
Is the answer exact?
It is as exact as the formula and the inputs allow. The method itself is the standard one for this problem, so the only sources of error are the figures you enter and the precision you ask for.