Whether you are estimating on the spot or checking a result somebody else gave you, the parallel resistor calculator is the quickest way to get from equivalent resistance, resistor 1 (r1), resistor 2 (r2), resistor 3 (r3), resistor 4 (r4), resistor 5 (r5), resistor 6 (r6), resistor 7 (r7), resistor 8 (r8) and resistor 9 (r9) to resistor 10 (r10).
What Is the Parallel Resistor Calculator?
This parallel resistor calculator is for the kind of problem where you know the physical quantities but not the number you need. It turns equivalent resistance, resistor 1 (r1), resistor 2 (r2), resistor 3 (r3), resistor 4 (r4), resistor 5 (r5), resistor 6 (r6), resistor 7 (r7), resistor 8 (r8) and resistor 9 (r9) into resistor 10 (r10).
Physics calculations go wrong in predictable ways, usually through mixing units or dropping a digit. Work through the result one step at a time and check that the figures are the size you would expect at each stage.
How the Parallel Resistor Physics Works
The relationship is applied step by step, and each step is a standard piece of physics rather than a single opaque formula. That means you can check the intermediate values against what the theory predicts, which is usually faster than checking only the final answer.
Keep every value in the same unit system throughout the calculation. Mixing metres and feet part way through is the single most common reason a correct formula gives a wrong answer.
Units, Assumptions and the Limits of the Model
The calculation assumes ideal conditions: no air resistance, no heat loss, and dimensions that do not change while you work. Those assumptions are reasonable for most classroom and engineering estimates, and unreasonable for anything more precise.
Where a value is a rate, it has to be quoted for the same period as everything else. A per-hour figure cannot be combined with a per-day figure without converting one of them first.
A Worked Example
Working through an example, with equivalent resistance set to 10, resistor 1 (r1) set to 5, resistor 2 (r2) set to 2, the calculator returns resistor 10 (r10) of -0.581395. Substitute your own figures and the same steps produce the same kind of answer.
Frequently Asked Questions
What do I need to work out resistor 10 (r10)?
Enter equivalent resistance, resistor 1 (r1), resistor 2 (r2), resistor 3 (r3), resistor 4 (r4), resistor 5 (r5), resistor 6 (r6), resistor 7 (r7), resistor 8 (r8) and resistor 9 (r9). The calculator then works through the relationship and reports resistor 10 (r10).
What does the parallel resistor actually calculate?
It takes equivalent resistance, resistor 1 (r1), resistor 2 (r2), resistor 3 (r3), resistor 4 (r4), resistor 5 (r5), resistor 6 (r6), resistor 7 (r7), resistor 8 (r8) and resistor 9 (r9) and converts them into resistor 10 (r10) using the standard relationship for this problem. Each step is applied in turn, so every output is traceable back to the numbers you typed in.
How should I enter equivalent resistance?
Use the value you actually have, in the unit shown next to the field. Enter every value in the same unit system. The calculator assumes the figures you supply are consistent, so it cannot correct a mistake that happens before the calculation starts.
Why does a small change in one value move the answer so much?
That happens when an output depends on a ratio, because dividing by a small number magnifies any change in it. Check the units first, then check whether the value you entered is in the range the relationship was designed for.
Can I use this for a quick estimate as well as a precise answer?
Yes. The calculator is built for quick checks, so round your inputs to a sensible number of significant figures and the result will be just as useful. If you need more precision, keep the same method and add digits to the inputs rather than adjusting the method itself.